No2Hipernik®Standard Specification for Nickel-Iron Soft Magnetic Alloys
Sheet Thickness:0.1mm~3.5mm
Plate Thickness:3.5mm~40.0mm
Bar Dia 5.0mm~Dia180.0mm
Products Application
Transformer cores, highly efficient motors, shielding, and specialized electronic devices, such as LF power transducers, chokes, relay parts, solenoids & oscillators.
Description
A soft magnetic alloy, consisting of 49% Nickel, balance Iron used where high initial permeability, maximum permeability, and low core loss is needed.
Parameter
TABLE 1 Cross Reference
Contury Name 1 2
Russia 50H
USA No2Hipernik
Uk Radiometal AnhysterD
Germany Hyperm50
Japan PCS
TABLE 2 Chemical Requirement
Element Composition,%
C ≤ 0.03
P≤ 0.020
S≤ 0.020
Mn≤ 0.30-0.60
Si≤ 0.15-0.30
Cu≥ 0.20
Ni 49.0-51.5
FE remainder
Notes:
1.the shape and dimensions of the alloys are in compliance with GBn198-88
TABLE 3 Physical Requirement
Property Value
ResisitivityμΩ•m) 0.45
Desinty g/cm3) 8.2
Curie Point ℃ 500
High saturated Magneto-striction Coefficientλθ/10-6 25
TABLE 4 Coefficient of Linear Expansion
20-100℃ 20-200℃ 20-300℃ 20-400℃ 20-500℃
8.9 9.27 9.2 9.2 9.4
TABLE 5 Magnetic Requirement (Cold rolling Strip)
(δ&D)/mm μ0.08/(mH/m)≥ μm/(mH/m)≥ Bs/T≥ Hc/(A/m)≤
0.05-0.09 2.5 35.0 1.50 20.0
0.10-0.19 2.9 40.0 1.50 14.4
0.20-0.34 3.3 50.0 1.50 11.2
0.35-0.50 3.8 62.5 1.50 9.6
0.50-1.00 3.8 62.5 1.50 9.6
1.10-2.50 3.5 56.3 1.50 9.6
II Condition : Cold Rolling Strip
0.10-0.19 3.8 43.8 1.50 12.0
0.20-0.34 4.4 56.3 1.50 10.4
0.35-0.50 5.0 65.0 1.50 8.8
0.51-1.00 5.0 50.0 1.50 10.0
1.0-2.5 3.8 44.0 1.50 12.0
Hot Rolling(forging) Flastspring
3-22 3.1 75.0 1.52 14.4
Hot Rollin (Forging)Bar
8-100 3.1 31.3 1.50 14.4
WHY US
1.Specialized in manufacturing high-precision alloy for 23+ years
2.We can tailoring your unique requirements with ASTM, UNS ,GOST, standards.
3. Good quality control in production process, ISO9001:2008, SGS, CQC, approved.
4. The whole process from raw material to finished products can be traced.
5. 40000 square meters workshop, advanced facilities and test equipment .
Our Service
1. Free Sampe with test report
2.Small Quantity accepted , if we have stocks, we can delivery as small as few kilogram to your specification.
3.Testing services available .
4.Inspection before delivery
5.Response within 24hours
6.Good after service
